Cub Cadet 7530 Maintenance Manual

9 List of Refueling, Lubrication, and Water/Oil Supply
30
9 List of Refueling, Lubrication, and Water/Oil
Supply
• Engine oil ........................... Multi STOU oil or better than diesel engine oil API classified, class CD,
SAE 10W - 30.
• Fuel .................................... Diesel gas oil A.P.I. specific gravity (min.) ..................................... 34
Inflammation point (min.).................................... 60 ºC
Clouding point (Wax appearing point) (max.) ..... -20.6 ºC
Pour point (max.) ............................................... -26 ºC
Distillation temperature, at point 90% ..... from 282 to 338 ºC
Viscosity : at 38 ºC
Centistokes...................................... from 2.0 to 4.3
Saybolt second universal .................. from 32 to 40
Cetane number (min.)
..... 43 (high lat. in winter: from 45 to 55)
Capacitance ratio of water and sediment (max.) ....... 0.05%
Weight ratio of sulfur (max.) .............................. 0.50%
Corrosion of copper strip (max.)...........................No.2
Weight ratio of ash residue (max.)..................... 0.01%
• Gear Oil.............................. Genuine oil or API classified GL - class 4, SAE, 80W
No. Item Kind
Classification
Capacity (L) Replacing Period
API Service
SAE
Viscosity No.
1 Engine Crank Case Engine oil
Over class
CD
10W-30
4.2
{1.1}
Inspect pre-operation
and change every 100
hrs. (Change after 50 hrs
at 1
st
inspection.)
2 Fuel Tank Gas oil - -
27
{7.1}
Inspect pre-operation.
(Supply accordingly.)
3 Radiator
Cooling water (incl.
antifreeze solution 40
to 45%)
- -
5.5
{1.5}
Inspect pre-operation.
(Supply accordingly.)
4 Transmission Case
Gear oil
(Multi STOU oil)
GL-4
80W
(10W-30)
GEAR : 29L{7.7gal}
HST : 32L{8.5gal}
Change after
100hrs 1
st
time and
every 200 hrs after.
5 Front Axle Case
Gear oil
(Multi STOU oil)
GL-4
80W
(10W-30)
4.0
{1.1}
Change after
100hrs 1
st
time and
every 200 hrs after.
6 Brake Link (Left/Right) Grease - - Properly
Lubricate before operation
and every 50 hrs.
7 Rod End 4 Points Grease - - Properly
Lubricate before operation
and every 50 hrs.
8 Front Axle Fulcrum Shaft Grease - - Properly
Lubricate before operation
and every 50 hrs.
9
Differential Locking Device
Pedal Fulcrum Shaft
Grease - - Properly
Lubricate before operation
and every 50 hrs.
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983

Cub Cadet 7530 Specifications

General

Brand	Cub Cadet
Model	7530
Category	Tractor
Language	English