Introduction 1
1
1 Introduction
This manual is prepared subject to the dealers for Cub Cadet Corporation and explains the procedures for repair and
adjustment work with illustrations, service value, and specialized tools, etc. required for the work. The repair and
adjustment procedures are described for all licensed service staff and inexperienced service staff.
This manual is complied based on the product as of December 2003. Prototype is used for contents of photos, etc.
and may differ from the actual vehicle.
1.1 Cautionary Items for Safety
It is important to follow the correct service method and procedures for safe and reliable work and safety of vehicle
and operators. This manual describes general cautionary items at maintenance and repair and effective method based
on the actual work.
It is difficult to instruct or warn for everything which could occur during service of vehicle since procedures,
techniques, tools, and skill levels of each staff vary depending on each case. Therefore, when working in a method or
with tools not described in this manual, take cautions for safety of staff and not to damage the vehicle.
1.2 Meanings of Warning, Caution, and Reference
Signal words in this manual include warning, caution, and reference.
Reference)Indicates referential information.
All dangers cannot be avoided by these warnings or cautions. Take caution for safety and do not overdo. Lack of
attention will lead to a hazardous situation.
1.3 Spare Parts
Use genuine parts for spare parts at maintenance.
W
ARN
I
N
G
Indicates an imminently hazardous situation, which if not avoided, may result in death or
serious injury.
CAUTION
Indicates a hazardous situation, which if not avoided, may result in vehicle or parts damages.
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983
To Next Page
Loading...
Need help?
General