HST 4
49
4.3 Assembly and Installation of
HST
Follow the procedure of removal and disassembly in the
reverse order for the assembly and installation of HST.
1 Assembly of HST Unit
1. Apply some oil to the O-ring for assembly.
2. Clean the composition face of the HST unit and
center case and assemble.
2 Assembly of HST Case
Apply some liquid packing (equivalent to Threebond
#1208D) to the composition face of the HST case and
mission case and assemble.
Stand
Centercase
HSTunit
Composition
face
GZ3W23-007
www.mymowerparts.com
K&T Saw Shop 606-678-9623 or 606-561-4983
To Next Page
Loading...
Need help?
General