D-Link DSL-3900 User Manual

28D-Link DSL-3900 User Manual
Section 4 - Conguration
ADSL
ADSL is one of the rst home broadband technologies introduced. ADSL uses
the DSL port on your DSL-3900 to connect to the Internet. In order for your
DSL-3900 to use ADSL, you must congure the WAN Connection Type and
your WAN Settings.
WAN Connection Type
Congure your
WAN connection:
Select ADSL to congure ADSL connection settings.
ADSL VC Setting
Interface: Select the interface from the drop-down menu.
Enable Virtual
Circuit:
Select whether to enable or disable this Virtual Circuit.
If you Enabled the selected interface, the following options are available:
VPI: Enter the Virtual Path Indicator (0 - 255).
VCI: Enter the Virtual Channel Indicator (32 - 65535).
Service Category: Select the type of ATM trac contract, UBR, CBR, NRT-VBR, or RT-
VBR.
If you selected UBR, CBR, NRT-VBR, or RT-VBR. the following option is available:
Vlan ID: Enter the VLAN ID. Enter a value from 10 - 4096. The default value is
835.

D-Link DSL-3900 Specifications

General

Ethernet WAN	Yes
SIM card slot	-
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
WLAN data transfer rate (max)	2600 Mbit/s
WLAN data transfer rate (first band)	800 Mbit/s
WLAN data transfer rate (second band)	1753 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	4
Security algorithms	WPA, WPA2
Processor cores	2

Weight and Dimensions

Depth	45.5 mm
Width	258.8 mm
Height	184.1 mm