84
DCS-2100 User’s Manual
D-Link Systems, Inc.
Using IP Surveillance Software
Insert
To insert a remote network camera to the camera list. Click the Insert button, an “Insert
New Channel” dialog will popup, as shown below. Specify the IP address, port, and
admin password of the network camera, click the Ok button to close the dialog. Then
the system will try to connect to the selected camera. If the connection succeeds, the
camera will be inserted to the camera selection list.
Once added, you will see the IP address of the camera and also the port that is opened
on the camera (port 80 in this example). The selected camera has been added to the
selection list.
To Next Page
Loading...
Need help?
General