65D-Link ShareCenter DNS-340L User Manual
Section 4 - Conguration
When rst powered on, during the initial boot sequence, the ShareCenter will wait to be assigned an IP address via DHCP. If
it does not receive a DHCP assigned IP address, the ShareCenter will be automatically assigned a 169.254.xxx.xxx address. It
is recommended that you use the included D-Link Storage Utility software when accessing and conguring the ShareCenter
for the rst time. If you want to change the IP address before logging in or you are having trouble connecting to the
ShareCenter IP address, you can use the Storage Utility software included on the product CD to locate the device on your
network and make any necessary changes.
D-Link Storage Utility
Network Storage
Device:
The D-Link Storage Utility displays any ShareCenter
devices it detects on the network here.
Refresh:
Click Refresh to refresh the device list.
Conguration:
Click Conguration to access the web-based
conguration utility of the ShareCenter.
LAN:
Congure the LAN Settings for the ShareCenter here.
You can only adjust these settings if Receive DHCP is
disabled.
Apply:
Click Apply to save changes to the LAN Settings.
Drive Mapping:
Volumes available for mapping are displayed here.
Available Drive
Letters:
Choose an available drive letter. Click Connect to map
the selected volume. Click Disconnect to disconnect the
selected mapped volume.
About:
Click About to view the software version of the Easy
Search Utility.
Exit:
Click Exit to close the utility.
To Next Page
Loading...
Need help?
General
