Danfoss VLT AutomationDrive FC 300 Series Service Guide

1 Introduction
1.1 Purpose of This Guide
This guide provides service information for the following
drives and drive modules:
•
D1h–D8h drives.
•
E1h–E4 drives.
•
J8–J9 drives.
•
VLT
®
Parallel Drive Modules.
•
Da2/Db2/Da4/Db4 parallel drive systems and VLT
®
Parallel Drive Modules.
•
Drive modules within D9h–D10h/E5h–E6h
enclosed drive systems. The drive modules within
these enclosed drive systems are based on D3h–
D4h and E3h–E4h drives.
It is intended to be used by authorized technicians to
identify faults and perform repairs.
The guide includes the following information:
•
Data for the
dierent enclosure sizes.
•
Description of user interfaces and internal
processing.
•
Troubleshooting and test instructions.
•
Disassembly and reassembly instructions.
VLT
®
is a registered trademark.
1.2
Additional Resources
Additional resources are available to understand advanced
drive functions and programming.
•
The Service Guide for Enclosures D9h–D10h and
E5h–E6h provides additional information for
servicing D9h–D10h and E5h–E6h enclosed drive
systems. (However, the drive modules within
these enclosed drive systems are based on D3h–
D4h and E3h–E4h drives, which are documented
in the current manual.)
•
The VLT
®
Parallel Drive Modules Installation Guide
provides information required for mechanical and
electrical installation of the VLT
®
Parallel Drive
Modules.
•
The VLT
®
Parallel Drive Modules User Guide
provides detailed information for start-up and
commissioning of parallel drive systems
composed of VLT
®
Parallel Drive Modules.
•
The product-specic programming guide provides
greater detail on working with parameters and
shows many application examples.
•
The product-specic design guide provides
detailed capabilities and functionality to design
systems using Danfoss drives.
•
The product-specic operating guide provides
information required to install and commission
Danfoss drives.
•
The product-specic kit instructions provide
information on installation of various options
available for Danfoss drives.
•
Technical documentation for other product
options is available at drives.danfoss.com/
knowledge-center/technical-documentation/.
Introduction Service Guide
MG94A502 Danfoss A/S © 02/2019 All rights reserved. 9
1 1

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English