Danfoss VLT AutomationDrive FC 300 Series Service Guide

10.2.21 Standard DC Capacitor Bank Layouts
Standard DC capacitor banks dier in the number of capacitors present and the location of fasteners, such as screws and
standos. The drive size and power rating determine the layout of the capacitor bank. Use Table 10.3 and Table 10.3 to nd
the capacitor bank layout for a particular drive in D1h/D3h/D5h/D6h/J8 sizes. Each illustration includes a table that lists
which fasteners are screws or standos, and which DC bus plate or midplate they secure.
Graphic reference Model
FC 102, FC 103, and FC 202 FC 302
Illustration 10.16 N110 N90K
Illustration 10.17 N132 N110
Illustration 10.17 N160 N132
Table 10.3 Standard DC Capacitor Bank Layout 380–480/500 V
Graphic reference Model
FC 102, FC 103, and FC 202 FC 302
Illustration 10.17 N75K N55K
Illustration 10.17 N90K N75K
Illustration 10.17 N110 N90K
Illustration 10.17 N132 N110
Illustration 10.17 N160 N132
Table 10.4 Standard DC Capacitor Bank Layout 525–690 V
e30bg906.10
1
2
1 Standard DC capacitor
2 Plug
Illustration 10.15 Standard DC Capacitor and Plug
D1h/D3h/D5h/D6h/J8 Drive Di...
VLT
®
FC Series, D1h–D8h, Da2/Db2/Da4/Db4, E1h–E4h, J8/J9
162 Danfoss A/S © 02/2019 All rights reserved. MG94A502
1010

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English