Illustration 2.2 Exploded View Large Unit
1 Inverter part 7 Display connection
2 Fastening screws (4 x, one in each corner) 8 Access to USB port
3 Sealing gasket 9 Service switch*-motor side (alternatively, switch located on mains side, or
not
mounted)
4 Inverter part
plastic cover 10 Flat mounting brackets
5 Ground connection pin 11 Circuit breaker* (optional)
6 Installation box * The unit can be configured with either service switch or circuit breaker,
not
both. The illustration shown is not configurable in practice, but is
displayed to show the respective positions of components only.
Installation
VLT
®
Decentral Drive FCD 302 Operating Instructions
MG04F302 - VLT
®
is a registered Danfoss trademark
11
2 2
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
To Next Page
Loading...
Need help?
General
