Contents | Illustration
Illustration 1.1: Frequency Converter Block Diagram
6
Illustration 2.1: Exploded View Small Unit 10
Illustration 2.2: Exploded View Large Unit 11
Illustration 2.3: Cable Entries and Hole Sizes (Small Unit) 12
Illustration 2.4: Cable Entries and Hole Sizes (Large Unit) 12
Illustration 2.5: Top and Bottom Cooling Clearance 13
Illustration 2.6: FCD 302 Stand Alone Mounted with Mounting Brackets 13
Illustration 2.7: Permitted Mounting Positions - Standard Applications 13
Illustration 2.8: Permitted Mounting Positions - Hygienic Applications 14
Illustration 2.9: Electrical Installation 15
Illustration 2.10: Large Unit only: Circuit Breaker and Mains Disconnect 16
Illustration 2.11: Large Unit only: Service Switch at Mains with Looping Terminals 16
Illustration 2.12: Location of Terminals (Small Unit) 17
Illustration 2.13: Location of Terminals (Large Unit) 17
Illustration 2.14: Opening the Terminals 18
Illustration 2.15: Parallel Connection of Motors 19
Illustration 2.16: PE Connection between the Installation Box and the Electronic Part 22
Illustration 2.17: Earthing (Grounding) Clamp for Motor and Control Wiring (Small Unit) 23
Illustration 2.18: Earthing (Grounding) Clamp for Motor and Control Wiring (Large Unit) 23
Illustration 2.19: Location of DIP Switches 25
Illustration 2.20: Electronic Part 25
Illustration 2.21: Jumper between Terminal 13 and 37 27
Illustration 2.22: Installation to Achieve a Stopping Category 0 (EN 60204-1) with Safety Cat. 3 (EN 954-1) / PL “d” (ISO
13849-1). 28
Illustration 4.1: LCP 33
Illustration 6.1: Frontal LEDs 64
Illustration 6.2: Status Display 64
Contents
VLT
®
Decentral Drive FCD 302 Operating Instructions
MG04F302 - VLT
®
is a registered Danfoss trademark
3
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
To Next Page
Loading...
Need help?
General
