Danfoss VLT MCD 600 User Manual

4 Specifications
4.1 Supply
Mains voltage (L1, L2, L3)
MCD6-xxxxB-T5
200–525 V AC (±10%)
MCD6-xxxxB-T7
380–690 V AC (±10%)
Control voltage (A7, A8, A9)
MCD6-xxxxB-xx-CV2 (A8, A9)
110–120 V AC (+10%/-15%), 600 mA
MCD6-xxxxB-xx-CV2 (A7, A9)
220–240 V AC (+10%/-15%), 600 mA
MCD6-xxxxB-xx-CV1 (A8, A9)
24 V AC/V DC (±20%), 2.8 A
Mains frequency
50–60 Hz (±5 Hz)
Rated insulation voltage
690 V AC
Rated impulse withstand voltage
6 kV
Form designation
Bypassed or continuous, semiconductor motor starter form 1
4.2 Short-circuit Capability
Coordination with semiconductor fuses
Type 2
Coordination with HRC fuses
Type 1
4.3 Electromagnetic Capability (Compliant with EU Directive 2014/35/EU)
EMC Immunity
IEC 60947-4-2
EMC Emmissions
IEC 60947-4-2 Class B
4.4 Inputs
Input rating
Active 24 V DC, 8 mA approximately
Motor thermistor (TER-05, TER-06)
Trip >3.6 kΩ, reset <1.6 kΩ
4.5 Outputs
Relay outputs
10 A @ 250 V AC resistive, 5 A @ 250 V AC AC15 pf 0.3
Main contactor (13, 14)
Normally open
Bypass contactor (03, 04)
Normally open
Relay output A (21, 22, 23)
Changeover
Relay output B (33, 34)
Normally open
Analog output (AO-07, AO-08)
Maximum load
600 Ω (12 V DC @ 20 mA)
Accuracy
±5%
4.6 Environmental
Operating temperature
-10 to +60 °C (14–140 °F), above 40 °C (104 °F) with derating
Storage temperature
-25 to +60 °C (-13 to +140 °F)
Operating altitude
0–1000 m (0–3280 ft), above 1000 m (3280 ft) with derating
Humidity
5–95% relative humidity
Pollution degree
Pollution degree 3
Vibration
IEC 60068-2-6
Protection
MCD6-0020B~MCD6-0129B
IP20
MCD6-0144B~MCD6-1250B
IP00
AQ262141844215en-000401 / 175R1174 | 29Danfoss A/S © 2020.12
Specifications
VLT® Soft Starter MCD 600
Operating Guide

Danfoss VLT MCD 600 Specifications

General

Brand	Danfoss
Model	VLT MCD 600
Category	Controller
Language	English