Danfoss VLT MCD 600 User Manual

Table 180: 11-7 - Pump Clean Cycles
Range
Function
* 1
1–5
Sets how many times the soft starter repeats the pump clean cycle.
10.16 Parameter Group 12-** Communication Card
Table 181: 12-1 - Modbus Address
Range
Function
* 1
1–254
Sets the Modbus RTU network address for the soft starter.
Table 182: 12-2 - Modbus Baud Rate
Option
Function
Selects the baud rate for Modbus RTU communications.
4800
*
9600
19200
38400
Table 183: 12-3 - Modbus Parity
Option
Function
Selects the parity for Modbus RTU communications.
*
None
Odd
Even
10-bit
Table 184: 12-4 - Modbus Timeout
Option
Function
Selects the timeout for Modbus RTU communications.
*
Off
10 seconds
60 seconds
100 seconds
Table 185: 12-5 - Devicenet Address
Range
Function
*0
0–63
Sets the DeviceNet network address for the soft starter.
AQ262141844215en-000401 / 175R1174 | 111Danfoss A/S © 2020.12
Programmable Parameters
VLT® Soft Starter MCD 600
Operating Guide

Danfoss VLT MCD 600 Specifications

General

Brand	Danfoss
Model	VLT MCD 600
Category	Controller
Language	English