Danfoss VLT MCD 600 User Manual

Table 186: 12-6 - Devicenet Baud Rate
Option
Function
Selects the baud rate for DeviceNet communications.
*
125 kB
250 kB
500 kB
Table 187: 12-7 - PROFIBUS Address
Range
Function
*1
1–125
Sets the PROFIBUS network address for the soft starter.
Table 188: 12-8 - Gateway Address
Range
Function
*192
0–255
Sets the 1
st
component of the network gateway address. The gateway address is set using parameters 12-8 to
12-11 and the default address is 192.168.0.100.
Table 189: 12-9 - Gateway Address 2
Range
Function
*168
0–255
Sets the 2
nd
component of the network gateway address.
Table 190: 12-10 - Gateway Address 3
Range
Function
*0
0–255
Sets the 3
rd
component of the network gateway address.
Table 191: 12-11 - Gateway Address 4
Range
Function
*100
0–255
Sets the 4
th
component of the network gateway address.
N O T I C E
The network address can also be set via the Network Address options in Set-up Tools.
Table 192: 12-12 - IP Address
Range
Function
*192
0–255
Sets the 1
st
component of the soft starter's IP address for Ethernet communications. The IP address is set using
parameter 12-12 to 12-15 and the default address is 192.168.0.2.
Table 193: 12-13 - IP Address 2
Range
Function
*168
0–255
Sets the 2
nd
component of the soft starter's IP address for Ethernet communications.
AQ262141844215en-000401 / 175R1174112 | Danfoss A/S © 2020.12
Programmable Parameters
VLT® Soft Starter MCD 600
Operating Guide

Danfoss VLT MCD 600 Specifications

General

Brand	Danfoss
Model	VLT MCD 600
Category	Controller
Language	English