Danfoss VLT MCD 600 User Manual

Table 194: 12-14 - IP Address 3
Range
Function
*0
0–255
Sets the 3
rd
component of the soft starter's IP address for Ethernet communications.
Table 195: 12-15 - IP Address 4
Range
Function
*2
0–255
Sets the 4
th
component of the soft starter's IP address for Ethernet communications.
N O T I C E
The network address can also be set via the Network Address options in the Set-up Tools.
Table 196: 12-16 - Subnet Mask
Range
Function
*255
0–255
Sets the 1
st
component of the network subnet mask for Ethernet communications. The subnet mask is set using
parameters 12-16 to 12-19 and the default mask is 255.255.255.0.
Table 197: 12-17 - Subnet Mask 2
Range
Function
*255
0–255
Sets the 2
nd
component of the network subnet mask for Ethernet communications.
Table 198: 12-18 - Subnet Mask 3
Range
Function
*255
0–255
Sets the 3
rd
component of the network subnet mask for Ethernet communications.
Table 199: 12-19 - Subnet Mask 4
Range
Function
*0
0–255
Sets the 4
th
component of the network subnet mask for Ethernet communications.
N O T I C E
The network address can also be set via the Network Address options in the Set-up Tools.
Table 200: 12-20 - DHCP
Option
Function
Selects whether the communications card accepts an IP address assigned by DHCP.
*
Disable
Enable
N O T I C E
DHCP addressing is available with Modbus TCP and EtherNet/IP. DHCP addressing is not supported with PROFI-
NET.
AQ262141844215en-000401 / 175R1174 | 113Danfoss A/S © 2020.12
Programmable Parameters
VLT® Soft Starter MCD 600
Operating Guide

Danfoss VLT MCD 600 Specifications

General

Brand	Danfoss
Model	VLT MCD 600
Category	Controller
Language	English