KRYPTON ONE is the latest addition of rugged DAQ modules in the
KRYPTON family line. KRYPTON ONE is the smallest IP67 DAQ module in
the world. The pocket-size allows the modules to be mounted in tight
places, right next to the sensors. Units are highly distributable, connected
with a single cable for power, data, and synchronization.
KRYPTON ONE data acquisition modules are completely compatible with
every other KRYPTON, SIRIUS and other data acquisition systems from
Dewesoft.
Main characteristics of KRYPTON ONE modules:
● The fastest KRYPTON: single-channel architecture allows a maximum sample rate of 40 kS/sec.
● Isolation: all analog KRYPTON ONE modules are fully isolated.
● Current input: 1xSTG includes an internal shunt for two current input ranges (20 mA, 2 mA).
● High current drive: 4xDO is capable of sinking 2 A current to drive high loads.
● Easy stacking: modules can be stacked and tightened together with M4 hex key screws. 3.1.6.
Works with 3rd-party Real-Time EtherCAT Master
The entire KRYPTON product line can be used with any 3rd-party real-time EtherCAT master for
real-time data acquisition and control applications.
Because KRYPTON offers perfect signal conditioning and offers very rugged distributed units it is a
perfect device that can be used in most demanding real-time test and control applications.
4.1.6. DAQ Synchronization
KRYPTON data acquisition hardware is capable of acquiring different signals like voltage, bridge, IEPE,
thermocouple, digital, and more. With included Dewesoft X3 software, you can easily acquire data from
additional interfaces like GPS, Flexray, Ethernet, Serial, PCM telemetry, and many more.
Even though each data source can have different sampling rates (software selectable for each channel),
all data is always perfectly synchronized down to microsecond accuracy. The synchronization between
KRYPTON modules runs through the same cable as power and data.
KRYPTON DAQ modules can also be combined and synchronized with our fast USB DAQ devices like
SIRIUS , IOLITE , MINITAURs or DEWE-43-A . For this we have a small accessory called EtherCAT Sync
Junction . This box will provide a clock source for synchronization. External timing sources like GPS or
IRIG can be connected and used.
KRYPTON® V20-1 25 / 141
To Next Page
Loading...
Need help?
General
