DEWESOFT Krypton - KRYPTONi-1 xCAN, KRYPTONi-1 xCAN-FD

To Next Page

To Previous Page

KRYPTON® 

TECHNICAL REFERENCE MANUAL 



KRYPTONi-1xCAN, KRYPTONi-1xCAN-FD 

CAN ports speciﬁcation 

Number of ports 

1 

Interface type 

CAN 2.0B 

CAN-FD, CAN 2.0B 

Interface data rate 

up to 1 Mbit/sec 

up to 8 Mbit/sec 

Special protocols 

J1939 

Galvanic isolation 

Isolated 

Bus pin fault protection 



±28 V 

Power speciﬁcation 

Power supply 

9 - 50 V DC 

Maximum sensor power consumption



3 W max total 

Maximum power consumption 



max. 2 W (no load) 

Environmental speciﬁcation 

Interface 

EtherCAT, 100 Mbit/s 

Lemo 1T 

(1 cable for data, power and sync, daisy 

chainable) 

EtherCAT, 100 Mbit/s 

Lemo 1T 

(1 cable for data, power and sync, daisy 

chainable) 

Connector type 

DSUB-9 

Physical dimensions 

62 x 56 x 29 mm 

Weight 

200 g 

0.44 lbs 

200 g 

0.44 lbs 

Operating temperature 

-40 °C to +85 °C 

Storage temperature 

-40 °C to +85 °C 

Humidity 

- 

IP protection 

IP65 / IP67 



5.4.2. KRYPTONi-2xCAN-USB 

KRYPTONi-2xCAN-USB has 2 CAN ports and it uses USB 2.0 as an interface. 



KRYPTONi-2xCAN-USB 



 

KRYPTON® V20-1 42 / 141  

Main Page

DEWESOFT Krypton - KRYPTONi-1 xCAN, KRYPTONi-1 xCAN-FD

Table of Contents

Related product manuals