Revision history—90001539
Revision Date Description
C March
2018
Added the Get started with MicroPython section.
D November
2018
Added Bluetooth (BLE)support, SPIsupport, and Custom Default
ATcommands.
E April 2019 Added sleep support, file system, OTA file system updates, and several
MicroPython features.
F September
2019
Adding/updating relay frames. Added %P.
Added statuses to the 0x8A frame. Added location AT commands. Added DM.
Added the I/O support section. Added %P, *S, *V, *W, *X, *Y, SA, AZ,
FSINFOFULL,and DM. Updated RR. Updates to Remote AT Command
Request frame. Added location and BLEcommands. Added statuses to the
0x8A frame. Added frames Ox2C, 0x2D, 0x2E, 0x89, 0x98, 0xAC, 0xAE, and
0xAD. Added Get started with BLE and BLE reference sections. Made
changes to the CCAoperations section. Added reserved endpoints to 0x11
frame.
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2019 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document “as is,” without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Warranty
To view product warranty information, go to the following website:
www.digi.com/howtobuy/terms
Customer support
Gather support information: Before contacting Digi technical support for help, gather the following
information:
Product name and model
Digi XBee® 3 Zigbee® RF Module
2
To Next Page
Loading...
Need help?
General
