Digi XBee® 3 Zigbee® RF Module
7
Security policy 80
Channel selection 80
PAN ID selection 80
Persistent data 80
Coordinator startup 81
Permit joining 82
Reset the coordinator 82
Leave a network 83
Replace a coordinator (security disabled only) 83
Example: start a coordinator 84
Example: replace a coordinator (security disabled) 84
Router operation 85
Discover Zigbee networks 85
Join a network 85
Authentication 85
Persistent data 85
Router joining 86
Router network connectivity 87
End device operation 89
Discover Zigbee networks 89
Join a network 90
Parent child relationship 90
End device capacity 90
Authentication 90
Persistent data 91
Orphan scans 91
End device joining 91
Parent connectivity 92
Reset the end device 92
Channel scanning 92
Manage multiple Zigbee networks 93
Filter PAN ID 93
Configure security keys 93
Prevent unwanted devices from joining 93
Application messaging framework 94
Transmission, addressing, and routing
Addressing 96
64-bit device addresses 96
16-bit device addresses 96
Application layer addressing 96
Data transmission 96
Broadcast transmissions 97
Unicast transmissions 97
Address resolution 97
Address table 98
Group table 99
Binding transmissions 99
Multicast transmissions 99
Address resolution 99
Address resolution 99
Binding table 100
Fragmentation 100
Data transmission examples 100
To Next Page
Need help?
General
