3
IP2371EN
These precautions are an integral and essential part of the prod-
uct and must be supplied to the user. Read them carefully since
they contain important information on safe installation, use and
maintenance. These instructions must be kept and forwarded to
all possible future users of the system
•
This product must be
used only for the specific purpose for which it was designed. Any
other use is to be considered improper and therefore dangerous.
The manufacturer cannot be held responsible for any damage
caused by improper, incorrect or unreasonable use
•
Avoid oper-
ating in the proximity of the hinges or moving mechanical parts.
Do not enter within the operating range of the motorized door
or gate while it is moving. Do not obstruct the motion of the mo-
torized door or gate, as this may cause a dangerous situation
•
Lock and release the door or gate wings only when the motor is
switched off. Do not enter within the action range of the door or
gate wing(s)
•
In case of operation in “hold-to-run” (“dead man”)
mode, the corresponding command devices must be located so
to have direct and complete view of the door or gate during the
maneuvers, away from any moving parts, at a minimum height
of 1.5 m, and out of reach of the public
•
The motorized door or
gate may be used by children over the age of 8 and by people with
reduced physical, sensorial or mental abilities, or lack of expe-
rience or knowledge, as long as they are properly supervised or
General safety precautions for the user
ATTENTION! Important safety instructions.
Please follow these instructions carefully. Failure to observe
the information given in this manual may lead to
severe personal injury or damage to the equipment.
Keep these instructions for future reference.
WARNING! Disconnect power supply before
any cleaning or maintenance operation.
This manual and those for any accessories can be
downloaded from www.ditecautomations.com.
To Next Page
Loading...
Need help?
General
