DITEC LCA85 User Manual

8
IP2371EN
2.1 Applications
2. Technical specifications
Power supply 230 V~ ±10%, 50/60 Hz
Power absorption 4.2 A max
Fuses F1= F5A (Motor driver circuits)
Motor output 230 V~ 50/60 Hz; 1 x 4 A max
Permanent power supply to accessories 0-30 24 V
0.3 A max
WARNING: the total sum of the
current values delivered by 30,1
and 24 V~ outputs must never
exceed 0.5 A
Power supply to accessories 0-1 24 V
0.3 A max
24 V~ accessory power supply 24 V~ 0.3 A max
230 V~ flashing light output 25 W max
Ambient temperature
-20 °C - +55 °C
Remote controls 100/200 [see RO → MU → 10/20]
Radio frequency
433.92 MHz (prod. code ZENRS) or 868.35 MHz (prod. code
ZENPRS)
The receiver module is purchasable separately.
Degree of protection of the housing IP55
Product size
LCA85: 187x261x103 mm
LCA85B: 238x357x120 mm
NOTE: The given operating and performance features can only be guaranteed with the
use of DITEC accessories and safety devices.
1. Safety functions
The Ditec LCA85 control panel has the following safety functions:
- obstacle recognition with force limiting.
The maximum response time of the safety functions is 0.5 s. The reaction time to a faulty safety
function is 0.5 s. The safety functions comply with the standards and performance level indicated
below:
EN ISO 13849-1:2015 Category 2 PL=c
The safety function cannot be bypassed either temporarily or automatically. Fault exclusion has
not been applied.

DITEC LCA85 Specifications

General

Brand	DITEC
Model	LCA85
Category	Control Panel
Language	English