DSC HS2016 User Manual

4 Securing the Premises
13
• Arming all other internal sensors.
Arming the system in Night mode is only possible after the system has first been armed in Stay mode. To
access armed interior areas when the system is armed in Night Mode, you must disarm the system.
4.1.4 No-Entry Arming
No-Entry Arming arms the system in Stay mode by:
• Removing the Entry Delay from all configured zones.
• Arming all perimeter sensors.
• Bypassing all interior sensors.
An entry through any zone will create an instant alarm.
NOTES: Ensure that your installer has provided you with a list identifying all programmed night zones.
Your installer can configure a function key to arm the panel in Night mode without the system
already being armed in Stay mode.
To Arm the System in Night mode LCD Display
1. If configured, press and hold the Night Arm key for 2 seconds.
OR
1. Once the system is armed in Stay mode (Armed indicator is on) at any
keypad press
OR
press .
Date Time
JAN 02/13 2:06a
then
Press (*) for <>
Interior Arm
2. If required, enter your [access code]. All interior zones will now be armed,
except for devices programmed as Night Zones.
• The Night mode icon turns on.
Enter Your
Access Code
then
Interior Has
Been Armed
To gain access to interior areas that are armed during Night mode
• Disarm the system by entering your [access code].
To No-Entry Arm the System LCD Display
1. Check that the Ready indicator is on and your system is ready to be armed.
Date Time
JAN 02/13 2:06a
2. Press and, if required, enter your [access code].
Enter Your
Access Code
3. If zones have been bypassed, ICN or LED keypads bypass LED will light
and the bypassed zones #s will be shown. On an LCD keypad a warning
appears.
* Warning *
Bypass Active
then
4. After successfully initiating the arming sequence the:
• Armed light flashes as a reminder that the system is armed and has no
entry delay.
• Keypad sounds fast beeps.
• Keypad displays “Exit Delay in Progress”.
Armed With No
Entry Delay
then
Exit Delay in
Progress
5. To cancel the arming sequence, enter your [access code].
System Disarmed
No Alarm Memory
6. Once the exit delay timer expires, the system is armed.
System Armed
in Stay Mode
*
*
*
1
*
9

DSC HS2016 Specifications

General

Brand	DSC
Model	HS2016
Category	Security System
Language	English