DSC HS2016 User Manual

8 Configuring User Functions
32
8.1.6 User Callup
Using DLS, User Call-up allows your system to make one attempt to connect to the installer’s remote
computer. For a successful connection, the remote computer must be waiting for the system’s call.
8.1.7 Late to Open
Typically used to track children after school, the Late to Open feature allows you to be notified if your
alarm system is not disarmed by a programmed time of day.
For example, if you arrive from work at 5pm, and your child arrives home at 4 p.m. you could set the
programmable time for 4:15 p.m. If the system is not disarmed by 4:15 an alert would be sent to the
monitoring station and an event will be stored in the event buffer viewable from an LCD keypad. If SMS
notifications are configured for your system the monitoring station will notify you via SMS message. For
more information see 8.1.1 "Event Buffer".
2. Press to enable/disable the SystemServ/DLS feature.
SystemServ/DLS
is Enabled
or
3. When finished press to return to the Ready state.
SystemServ/DLS
is Disabled
NOTE: Access to this feature must be configured by installer.
To perform a User Callup LCD Display
1. From the User Function menu use the shortcut key or press
to scroll to User Callup.
Press (*) for <>
User Callup
2. When finished press to return to the Ready state.
NOTE: Access to this feature must be configured by installer.
To enable/disable Late to Open LCD Display
1. From the User Function menu use the shortcut key or press
to scroll to Late to Open.
Press (*) for <>
Late to Open
2. Press to enable/disable the Late to Open feature.
Late to Open
is Enabled
or
3. When finished press to return to the Ready state.
Late to Open
is Disabled
To set the Late to Open time LCD Display
1. From the User Function menu use the shortcut key or press
to scroll to Late to Opn Time.
Press (*) for <>
Late to Opn Time
2. Press to open a days of the week sub menu. Scroll the days of the week
and press to set the time for that day.
OR
If using an ICN or LED keypad to select the desired day press [1-7] where 1=
Sunday and 7=Saturday.
Press (*) for <>
Sunday
To enable/disable the System Service/DLS (Continued) LCD Display
*
#
0
6
#
0
9
*
#
1
0
*
*

DSC HS2016 Specifications

General

Brand	DSC
Model	HS2016
Category	Security System
Language	English