DSC HS2016 User Manual

6 Wireless Keys and other Devices
24
6.3.1 Using the Keypad to Lookup the Number to Call for SMS Commands
The phone number of the system is programmed by the installer. To quickly find the phone number
perform the following steps
.
6.3.2 Sending SMS Commands to your System
In order to successfully send commands to your system from your cellphone, you must send SMS messages
in the proper format. If configured, commands require the inclusion of a User Access Code in your
message. The access code will be verified by the system before executing any commands.
Additional information about sending SMS commands:
• Text messages are not case sensitive and extra spaces are ignored.
• In multi-partition systems and if the User has rights to manage the desired partitions, commands can
be sent to specific partitions by including the partition number. For more information on partitions see
section 10 "Managing Partitions".
• If the panel is configured to require an Access Code and the code is not sent or is invalid, the panel
will send a notification to the user advising the command was unsuccessful.
Table 6-1 lists all available SMS commands with examples of how to enter the Partition number and access
codes. The format for entering commands is as follows:
To find the System’s Phone Number LCD Display
1. Check that the Ready indicator is on and the system is disarmed.
Date Time
JAN 02/13 2:06a
2. Press
OR
press and use the scroll keys to navigate to User Functions
press and enter [Master Code].
Press (*) for <>
User Functions
3. Press or use the scroll keys to navigate to SMS Pro-
gramming and press
Press (*) for <>
SMS Programming
4. Scroll to navigate to SMS Programming and press . The phone
number to send your SMS commands to displays.
Press (*) for <>
GSM Phone No.
Command Partition number Access Code
Stay Arm
001 1234
NOTES: Verify with your installer that the Partition number and access code are required in your SMS
message. If one or both are not required, do not enter them in your SMS message.
Responses to Status and Alarm Memory requests may require more than 1 SMS message,
depending on status of the system. There is a 10 second delay between transmission of SMS
messages.
Table 6-1 SMS Commands
Commands Notes
Stay Arm Stay arms the system
Away Arm Away arms the system
Night Arm
Night arms the system
Disarm
Disarms the system
Activate Command Output 1
Activates Output 1
*
6
*
*
1 1
*
*

DSC HS2016 Specifications

General

Brand	DSC
Model	HS2016
Category	Security System
Language	English