DSC HS2016 User Manual

7 Managing Users
27
7.1.1 Adding, Changing and Deleting Access Codes
Each configured user is assigned a number from 01-95. Access codes cannot be duplicated.
Duress
Codes
Use if forced to access your keypad under threat. Duress codes function the same as
user access codes, except they transmit a Duress Report to your monitoring station
when used to perform any function on the system.
Duress codes cannot be used to access Access Codes[*5], User Functions[*6] or
Installer[*8] menus. For information on how to program a Duress Code see 7.2 "Con-
figuring additional User Options".
One Time
User Code
Use when needing to grant someone one time access to your home once per day, i.e., a
cleaning person or contractor. The ability to disarm the system is reset at midnight or
when the one time user code is keyed in by the master code user. For information on
how to program a One Time User Code see 7.2 "Configuring additional User Options".
To open the Access Codes Menu LCD Display
1. Press
OR
press and use the scroll keys to navigate to Access Codes and
press .
Press (*) for <>
User Functions
2. Enter [Master or supervisor code].
Enter Master
Access Code
3. Enter [2 digit user #]
OR
scroll through the list of users and press . On an LED keypad
the user number will begin flashing.
Press (*) for <>
{User Label}
4. To go back to the Ready state press .
To Add or Change User Access Codes LCD Display
1. From the desired user press or
Press (*) for <>
Access Code
2. Enter a new 4 or 6 digit access code. After entering a new code you will be
automatically returned to the previous menu, and on an LCD display the flag
is changed to P from -. On an ICN or LED keypad the programmed user will
have their digits displayed. If a duplicate code is entered the error tone will
sound.
Enter New Code
XXXXXX
then
Press (*) for <>
User Code 03 P
To Delete a User Access Code LCD Display
1. From the desired user press or
Press (*) for <>
Access Code
2. Press . The code is deletes, and you are returned to the previous screen.
The flag is changed to - from P. On an ICN or LED keypad the programmed
user’s digits will cease being displayed.
Enter New Code
030516
then
(*) to Edit <>
User Code 03 -
NOTE: Any proximity tags associated with deleted user codes will need to be re-enrolled.
*
5
*
*
*
#
*
1
*
1
*

DSC HS2016 Specifications

General

Brand	DSC
Model	HS2016
Category	Security System
Language	English