4 Securing the Premises
19
4.6.1 Disarming Error
If your code is invalid, the system will not disarm and a 2-second error tone will sound. If this occurs, press
and re-enter your access code.
To Disarm the System with a Proximity Tag
• Present your Proximity Tag to a keypad equipped with a proximity sensor anytime the system is
armed. (Armed indicator is on) and if configured as required, enter your access code.
• If you walk through the entry door the keypad will beep. Present your Proximity Tag within _____
seconds to avoid an alarm condition.
NOTE: Duration of Entry timer is programmed by installer.
#
To Next Page
Loading...
Need help?
General
