11 Additional Features
41
11.5 Cross Zoning
The Control Panel includes the cross zone option that requires a trip on two zones within a given time
period, to start an alarm transmission sequence.
11.6 Swinger Shutdown
The Control Panel has a swinger shutdown feature that when enabled for CP-01 installation, a
programmable number of trips shall shut down the zone.
11.7 Call Waiting
The Control Panel includes a programmable option for call waiting to prevent a call waiting line from
interfering with the alarm verification process. This option is disabled by default.
11.8 Fire Alarm Verification
Fire Alarm Verification is an available option for Fire zones. If configured, once the conditions for alarm
verification are met the fire alarm will sound and an alarm transmission will be sent to the monitoring
station.
To configure a Command Output to Follow a Schedule LCD Display
1. Press and use the scroll keys to navigate to Follow
Schedule and press
OR
press .
Output Control <>
Scroll to View
then
Press (*) to
Follow Schedule
2. Press the command output #(1-4) to toggle scheduling and if required enter
your [access code]
OR
use the scroll keys to navigate to the desired command output and
press to toggle scheduling and if required enter your [access code].
Partition 1 <>
Command O/P 1 Y
NOTE: Must be enabled and configured by installer.
NOTE: Must be enabled and configured by installer.
NOTE: Must be enabled and configured by installer.
NOTE: Must be enabled and configured by installer.
7
9
To Next Page
Loading...
Need help?
General
