DSC HS2016 User Manual

7 Managing Users
29
7.1.4 Assigning a Partition to a User code
User codes can be configured to have access only to specific partitions. For more information see section
10 "Managing Partitions".
7.2 Configuring additional User Options
Users can also be assigned the following options:
4. When the required letter or number is displayed use the arrow keys to
scroll to the next letter.
5. When finished, press the key, use the keys to scroll to Save then
press .
NOTE: Partitions are configured by your installer.
To Assign a Partition to a User code LCD Display
1. From the desired user press or scroll to Partition Assign and
press .
Press (*) for <>
Partition Assign
2. Press to toggle assigning, Y or N, the partition to the user.
OR
If using an LED or ICN keypad press the [partition #].
(*) To Toggle <>
{Partition Lb} Y
[1] Supervisor Code For more information see 7.1 "Access Code Types".
[2] Duress Code For more information see 7.1 "Access Code Types".
[3] Zone Bypass Grants the user the ability to bypass zones.
[4] Remote Access Grants the user the ability to use SMS features. For more information see 6.3
"SMS Command and Control"
[7] Bell Squawk Use to generate a bell squawk when arming/disarming the system.
NOTE: When using wireless keys to arm/disarm the system there will be:
• one bell squawk for arming
• two bell squawks for disarming.
• three squawk pairs when disarming with an alarm in memory.
[8] One Time Use For more information see 7.1 "Access Code Types".
To Configure additional User Options LCD Display
1. From the desired user press or scroll to User Options and press
.
Press (*) for <>
User Options
2. Use the keys to cycle through the User Options and press to
toggle configuring the displayed option.
OR
3. If using an LED or ICN keypad press the [feature number as listed above].
(*) To Toggle <>
Bell Squawk Y
To Edit a User Label LCD Display
*
*
4
*
*
5
*
*

DSC HS2016 Specifications

General

Brand	DSC
Model	HS2016
Category	Security System
Language	English