Duplo DF-990 User Manual

56
Chapter3AdvancedOperation
Copyright © 2019 Duplo Corporation All Rights Reserved
4-3. Cross fold paper at desired folding position
Crossfoldingisamethodtocrossfoldstandardpaperandnon-standardpaperatthedesiredfolding
position.Standardpaperishandledthesameasnon-standardpaperandisoperatedinamethodthatsaves
the folding position on the custom fold.
1
Save the custom fold using the procedure in “3. Custom Folding” (p.47).
2
Single-fold the paper in the custom folding mode.
3
Again, save the custom fold of the single folded paper using the procedure in “3.
Custom Folding” (p.47).
4
Take procedures for “4-1-1. Stacking paper” step 2 to “4-1-3. Operation procedures” of
“4-1. Cross fold of standard paper” (p.51).
5. Using Special Paper
Do not put ngers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
5-1. Art paper, coated paper
Art paper and coated paper often stick to each other due to the printing ink and become dicult to separate,
resultingindouble-feed.Whenusingthesetypesofpaper,followtheprocedurebelow.
1
Separate the paper well.
Chapter 1”8-1. Paper used” (p.30)
Someofrecycledartorcoatedpapermaybeunsuitableforfoldingduetoweakstiness.
2
Align the paper.
3
4
4
25 mm
0.98 inch
3
Stack the paper on the paper feed tray.
4
Attach the paper feed guide.
Do not stack too many sheets of paper on
the paper feed tray. If too many sheets are
stacked, the paper will stick on each other
from its height and become difficult to
separate, resulting in double-feed.
The amount of stacked sheets should be
about half the weight of the paper feed
guide (approx. 25 mm/0.98 inch).

Duplo DF-990 Specifications

General

Brand	Duplo
Model	DF-990
Category	Folding Machines
Language	English