QS Series Basic Operator's Guide
Wet wipe the jet packs
Wet wipe the jet pack faces with SCAQMD maintenance fluid
and a VUTEk-approved wipe.
Print a sample jet test
1. From the VUTEk User Interface, right-click Test ( ), on
the popup menu, click Check Jets.
2. Click Test ( ).
For more information on printing the jet test, as well as
instructions on how to interpret the test, see page 32.
f If the jet test is acceptable, begin printing.
f If the jet test is not acceptable, do another ink purge,
wet wipe the jet packs again, and repeat the jet test.
3. Label the jet test with the date and time. Save the jet test
for your records.
Stopping in an emergency
In case of an emergency, immediately press any of the
emergency stop buttons to stop the printer.
Before operating the printer, familiarize yourself
with the location and operation of the
emergency stop buttons.
You will find emergency stop buttons to the right and left
side of the print area on both the front and rear of the
printer.
An emergency stop button
When pressed, the emergency stop buttons,
OMM-00038-US English-F 11
To Next Page
Loading...
Need help?
General
