QS Series Basic Operator's Guide
Printing
A trained operator must be present at all times
during printing.
Without the immediate intervention of a trained
operator, small problems and failures during
printing can cause significant damage to your
printer.
Using the media conveyor belt
The media conveyor belt moves the media to be printed into,
and out of, the printer.
The step size setting and print mode control the media
conveyor belt’s movement during printing. Loading and
unloading media requires direct control of the media
conveyor belt’s movement.
Stepping the media conveyor belt
Stepping moves the media conveyor belt a preset distance.
Set the step size to a negative value to reverse the media
conveyor belt’s direction.
1 From the VUTEk User Interface, right-click Step Media
( ).
2 In the Set Media Step dialog box, enter the distance you
want the media conveyor belt to move in the Step
Amount box.
f A positive number moves the media conveyor belt
forward.
f A negative number, using a minus sign (–), moves the
media conveyor belt backwards.
3 Click Apply (
).
4 Click Step Media (
) or Step Media Reverse ( ) to
move the media conveyor belt (and the media).
Jogging the media conveyor belt forward
Jogging moves the media conveyor belt continuously forward
(and into the printer). The media continues to move until you
stop it.
OMM-00038-US English-F 13
To Next Page
Loading...
Need help?
General
