QS Series Basic Operator's Guide
Preventive Maintenance
Perform all daily, weekly, and periodic maintenance
procedures on schedule to keep your printer running at its
best.
Your printer’s Maintenance Log contains checklists for all
your printer’s maintenance functions. These checklists can
help you track the date and time each procedure is
performed. After performing each maintenance task, be sure
to record the date and time in your Maintenance Log.
A properly maintained Maintenance Log can be a valuable
diagnostic resource to help EFI’s technical support
representatives should they need to help you.
Maintenance materials
The following materials should be available to complete the
required maintenance procedures:
f UV safety glasses
f Standard safety glasses
f Nitrile gloves
f Sleeve protectors
f General purpose cleaning cloths
f VUTEk-approved clean room wipes
f Light oil (5-weight, non-detergent — such as 3-In-One
brand, or similar)
f Isopropyl (rubbing) alcohol
f SCAQMD maintenance fluid
Lockout/tagout
The lockout/tagout procedure prevents anyone from
inadvertently restoring power to the printer while you are
working on it.
44 OMM-00038-US English-F
To Next Page
Loading...
Need help?
General
