EMC Symmetrix DMX-3 Product Guide
21
Preface
As part of its effort to improve and enhance the performance and capabilities
of the Symmetrix product line, EMC periodically releases revisions of the
Symmetrix hardware and Enginuity Operating Environment. Therefore,
some functions described in this guide may not be supported by all versions
of Symmetrix hardware or Enginuity currently in use.
For the most up-to-date information on Symmetrix and Enginuity,
refer to the “Symmetrix DMX-3, DMX-4 EMC Enginuity Release
Notes”, located on EMC Powerlink.
If your Symmetrix DMX-3 does not function properly or does not function
as described in this document, please contact your EMC representative.
Audience This manual is part of the Symmetrix DMX series documentation set,
and is intended for use by storage administrators, system
programmers, or operators who are involved in acquiring, managing,
or operating the Symmetrix system.
Related
documentation
For additional information on all Symmetrix-related publications,
contact your EMC Sales Representative or refer to the EMC
Powerlink website at:
http://Powerlink.EMC.com
Conventions used in
this guide
EMC uses the following conventions for notes, cautions, warnings,
and danger notices.
Note: A note presents information that is important, but not hazard-related.
To Next Page
Loading...
Need help?
General
