248
EMC Symmetrix DMX-3 Product Guide
Mainframe Features and Support
Figure 59 z/OS IEA480E service alert error message format
(mirror-1 resynchronization)
EREP reports
The Environmental Record Editing and Printing (EREP) program is
an applications program that runs under the z/OS, VM, and VSE
operating systems. EREP helps you monitor the functioning of
various units in your system such as the processor,
I/O devices, controller, and channels by supplying information on
errors that have occurred in these components. When an error occurs,
the operating system creates a record from the data captured by the
hardware or software and writes it in the Error Reporting Dataset
(ERDS). EREP reads records directly from the ERDS and processes
them to produce the report or reports you request.
EREP error records Error records processed by EREP are described in detail in the IBM
EREP manual.
Note: Refer to the IBM EREP user's guide and reference for the formats of
these records.
*IEA480E 0D03,SCU,SERVICE ALERT,MT=3990-3,SER=,
REFCODE=E462-0000-6200
Channel Address of the Synchronized Device
E462 = Mirror-1 Volume Resynchronized with Mirror-2 Volume
To Next Page
Loading...
Need help?
General
