Emerson Process Management GmbH & Co. OHGS-12
X-STREAM Non-Incendive
Instruction Manual
HASXENE-IM-EX
12/2014
Startup
EXPLOSION HAZARD
Before applying power and signals:
• Verify for proper installation
• Verify that all covers and plugs are properly installed and in place!
• Verify that all gas connections are tight.
Violation may result in explosion, personal injury or death!
Safety Instructions
EXPLOSION HAZARD WHEN OPEN
Do NOT operate the instrument with doors or covers open! This is permitted
only when no hazardous atmosphere is present! Depending on the local
regulation, this may require a competent hot work supervisor to issue a
hot work permit.
Violation may cause an explosion hazard!
To Next Page
Need help?
General
