Emerson Process Management GmbH & Co. OHG 3-1
X-STREAM Non-Incendive
Instruction Manual
HASXENE-IM-EX
12/2014
3
Startup
Chapter 3
Startup
3.1 Safety Instructions and Final Check
Ensure that the analyzer has been installed
as described in chapter 2, and that all covers
and doors are closed and secured.
All unused cable connections need to be closed
with the provided permissible sealing plugs
(part # ETC00791; Fig. 3-1)
Unused openings for cable connections in
the housing need to be closed with a special
screw (part # ETC00790; Fig. 3-2).
Fig. 3-1: Sealing Plug for Cable Connections Fig. 3-2: Hexagon Socket Screw As Sealing
Plug for Unused Cable Inlet Openings
EXPLOSION HAZARD
Startup, operation and service must not be performed before reading and
understanding all instructions!
Especially all warnings in this, and all associated manuals have to be
considered!
EXPLOSION HAZARD
Use the above mentioned approved components only!
To Next Page
Loading...
Need help?
General
