About the Printer Software for Windows 132
❏ If the printer driver is installed in the client beforehand, you need to select either the new printer
driver or the current printer driver. When the prompt to select the printer driver appears, select the
printer driver according to the message.
❏ If the additional driver for the corresponding Windows is installed in the print server, go to the next
step.
6. Select whether to use the printer as the default printer or not, then click Next.
7. Make sure of the settings, then click Finish.
Installing the printer driver from the CD-ROM
This section describes how to install the printer driver in the clients when setting the network
system without installing the additional drivers in the print server.
The on-screen displays on the following pages may differ depending on the version of Windows
OS.
Note:
❏ When installing in Windows XP, XP x64, or 2000 clients, you must access Windows XP, XP x64, or
2000 as the Administrator.
❏ For Windows Vista or Vista x64, even if you are not an administrator or power user, you can install the
printer driver by clicking Continue when the prompt to continue the installation appears.
❏ If the additional drivers are installed or the computers of the server and clients use the same OS, you do
not have to install the printer drivers from the CD-ROM.
1. Access the shared printer and a prompt may appear. Click OK, then follow the on-screen
instructions to install the printer driver from the CD-ROM.
To Next Page
Loading...
Need help?
General