Technical Specifications 154
❏ Labels that peel easily or labels that do not cover the backing sheet completely
❏ Coated paper or special surface-colored paper
❏ Paper that has binder holes or is perforated
❏ Paper that has glue, staples, paper clips, or tape on it
❏ Paper that attracts static electricity
❏ Moist or damp paper
❏ Paper of uneven thickness
❏ Overly thick or thin paper
❏ Paper that is too smooth or too rough
❏ Paper that is different on the front and back
❏ Paper that is folded, curled, wavy, or torn
❏ Paper of irregular shape, or paper that does not have right angle corners
Printable area
4-mm minimum margin on all sides. (The printable width should be 202 mm or less.)
Note:
❏ The printable area varies, depending on the emulation mode in use.
❏ When using ESC/Page language, there is 5-mm minimum margin on all sides.
❏ The print quality may be irregular depending on the paper you use. Print on one or two sheets of paper
to check the print quality.
To Next Page
Loading...
Need help?
General