Solving Sound Problems
100
If there is no sound or the volume is too low, try the following steps until the
problem is solved.
a
Adjust the projector's volume settings using the or button on
the remote control.
a
If you have adjusted the volume for your streaming media player
using the remote control for the streaming media player, you
may also need to adjust the volume again.
b
Check the cable connection between the projector and your video
source.
c
Check the following settings on the projector:
• Press the button on the remote control to resume video and
audio if they were temporarily stopped.
d
Check the following settings on your video equipment:
• Check your streaming media player or video source to make sure the
volume is turned up and the audio output is set for the correct
source.
• Set the connected device to PCM output.
• When you are connecting the projector to a Mac using an HDMI
cable, make sure your Mac supports audio through the HDMI port.
gg Related Links
• "Projector Feature Settings - Settings Menu" p.70