Adjusting the Image Color
51
You can fine-tune various aspects of how colors are displayed in your
projected images.
gg Related Links
• "Adjusting the Color Temperature" p.51
• "Adjusting the RGB Offset and Gain" p.51
• "Adjusting the Hue, Saturation, and Brightness" p.52
• "Adjusting the Gamma" p.53
Adjusting the Color Temperature
You can set the overall color tone by adjusting the Color Temp. setting if the
image is too bluish or reddish.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
c
Select the Image menu and press [Enter].
d
Select Expert Settings > White Balance > Color Temp., and press
[Enter].
e
Press the left or right arrow button to adjust the color tone of the
image.
Higher values tint the image blue and lower values tint the image red.
f
Press or to exit the menus.
gg Related Links
• "Image Quality Settings - Image Menu" p.67
Adjusting the RGB Offset and Gain
You can adjust the brightness of dark and bright areas by adjusting the Offset
and Gain settings for individual image colors.
a
Turn on the projector and display an image.
b
Press the button on the remote control.