67
Chapter 4 Advanced Usage
Paper Layout Setting
When using roll paper with black marks, layout information such as the type and size of paper to be printed
must be set in the printer.
You can make settings for paper type and size in Paper layout setting. Paper type is set to Receipt paper (without
black mark) as default.
In case of using the Receipt paper (with black mark), you must select the Receipt paper (with black mark) for
paper type.
When the paper layout setting and the actual paper you are using do not match, the following situations may
occur.
• When Paper Type Setting is set to Receipt paper (without black mark) and receipt paper (with black mark) is
used, the printer detects paper out.
• When Paper Type Setting is set to Receipt paper (with black mark) and receipt paper (without black mark) is
used, a paper error occurs.
To make the Paper Layout Setting, there are following options available.
• Setting with the EPSON Advanced Printer Driver (APD)
Set the size of the paper that you are using correctly.
• Setting with the OPOS
See the “PTR_DI_SET_PAPERLAYOUT method” of your driver’s Application Development Guide for
details to make the settings.
• Setting with the ESC/POS command
See the “FS ( L <fn=33>” (Paper layout setting) of ESC/POS Command Reference for details to make the
settings.
• Setting with the Epson ePOS SDK
See “addLayout” method in Epson ePOS SDK User's Manual.
• For detailed information about the driver, see "Drivers" on page 88.
• For detailed information about downloading the software and manuals, see "Download" on
pa
ge 89.
To Next Page
Loading...
Need help?
General
