Epson Mobilink TM-P80II User Manual

75
Chapter 4 Advanced Usage
Restore Default Values Mode
In Restore default values mode, following values saved on NV Memory will be set back to initial settings. When
any error occurs, you can use to specify the reason.
Follow the steps below.
1
After running a self test, hold down the Feed button for at least one second to enter
the Mode selection.
The Mode selection guidance is printed, and the power LED flashes.
2
Briefly press the Feed button four times (less than one second), and then hold it
down for at least one second to enter the Restore Default Values.
The guidance is printed.
3
Briefly press the Feed button once (less than one second), hold it down for at least
one second. (Hold down the Feed button until the message of restore completion is
printed.)
Setting Item Restore default settings
Restore default settings
and Delete definition data
Customized Value ✔✔
Memory switch ✔✔
USB Interface Settings ✔✔
Network settings ✔✔
NV graphics - ✔
NV bit image - ✔
User defined page - ✔
User NV memory - ✔

Epson Mobilink TM-P80II Specifications

General

Brand	Epson
Model	Mobilink TM-P80II
Category	Printer
Language	English