Epson Mobilink TM-P80II User Manual

69
Chapter 4 Advanced Usage
Setting/Check Modes
As well as print mode, the following modes are also provided for making various printer settings and checking
items.
• Self-test mode
• NV graphics information print mode
• Software settings mode
• Restore default values mode
• Interface setup mode
• Radio field intensity check mode (Wi-Fi model)
• Hexadecimal dumping mode
The self-test mode or hexadecimal dumping mode is selected depending on the operation performed when the
power is turned on.
NV graphic information print mode, Software settings mode, and Restore default settings mode are selected
depending on the Feed button operation performed during a self-test.
Close the roll paper cover, and turn on the printer while pressing the Feed button.
Self-test
Briey press the Feed button. Hold down the Feed button.
Open the roll paper cover, and turn on the printer while pressing the Feed
button, and then close the roll paper cover.
Continuing the self-test
Mode selection guidance
Hexadecimal dumping
Press the Feed
button eight times
briey and then
hold it down.
Radio eld intensity
check
Press the Feed
button three times
briey and then
hold it down.
Software Settings
Press the Feed
button four times
briey and then
hold it down.
Restore Default
Values
Press the Feed
button ve times
briey and then
hold it down.
Interface Setup
Press the Feed
button once briey
and then hold it
down.
NV Graphics
Information

Epson Mobilink TM-P80II Specifications

General

Brand	Epson
Model	Mobilink TM-P80II
Category	Printer
Language	English