Managing Projectors 153
6. Click Add. The IP address appears in the list of registered
projectors and the searching icon appears beside it. If the
projector is found, its name appears in the projector list.
7. Repeat steps 5 and 6 for each projector you want to add to the
group.
8. Click
OK to save the projectors as a group. When you see a
confirmation message, click
Yes.
9. Click
Close to close the Advanced screen.
10. Click
OK to close the Extension screen, then close
NS Connection.
note
To remove a projector from
the group, select it from the
projector list and click
Delete.
To Next Page
Loading...
Need help?
General