When a Maintenance Request/Printer Error Occurs
Message What to do
Maintenance Request: Replace
Parts Soon
XXXXXXXXXXXXXXXX
A part used in the printer is nearing the end of its service life.
Contact your dealer or Epson Support and tell them the maintenance request code.
You cannot clear the maintenance request until the part is replaced. A printer error occurs
if you continue to use the printer.
Maintenance Request: End Of Parts
Service Life
XXXXXXXXXXXXXXXX
Printer error.
Turn the power off and on again.
If the problem persists, contact
Epson Support.
XXXXXX
Printer error is displayed in the following cases.
❏ The power cable is not connected securely
❏ An error that cannot be cleared occurs
When a printer error occurs, the printer automatically stops printing. Turn off the printer,
disconnect the power cable both from the outlet and from the printer, and then
reconnect. Turn the printer on and off several times.
If the same printer error is displayed on the LCD panel, contact your dealer or
EpsonSupport for assistance. Tell them the printer error code is "XXXXXX".
SC-F3000 Series User's Guide
Problem Solver
122
To Next Page
Loading...
Need help?
General