Heat press
❏ When using White ink
Temperature Time
Pressure
*1
130 ˚C 90 seconds
3.0 N/cm
2
❏ When using Color ink only
Temperature Time
Pressure
*1
130 ˚C
30 seconds
*2
3.0 N/cm
2
*1 The optimum conditions vary depending on the
type of heat press such as the manual adjustment
type. Be sure to test the ink fixing result in advance
to find the right pressure.
*2 Images larger than A4 and images with large
amounts of ink may not be sufficiently dried after
30 seconds depending on the type of fabric being
used, such as blended fabric. If the ink does not dry
enough, try extending the time while checking if
the ink is dry.
Oven
Type of Oven Temperature Time
Batch type/
Conveyor type
140 ˚C
*1
5 to 10 minutes
*2
*1 Temperature of the fixing surface of the T-shirt.
Not the internal temperature.
*2 Images that contain White ink require the
maximum time (10 minutes) to fix.
Printing from a USB
Memory
You can select and print jobs directly from the printer's
control panel by saving jobs to a USB memory from
Garment Creator for SC-F3000 Series on your
computer in advance.
See the manual for Garment Creator for SC-F3000
Series for the procedure to save jobs to a USB memory
from Garment Creator for SC-F3000 Series.
USB memory requirements
The following requirements need to be met to use a USB
memory.
❏ FAT device compatible with Windows
❏ Format: FAT, FAT32, or exFAT
❏ No security functions such as encryption or
passwords
❏ Memory capacity: Up to 2TB
❏ Partitions: 1
Requirements for supported data
❏ Data name: Up to 255 single-byte characters
❏ Data size: Up to 4 GB
❏ Number of data items: Up to 999 (prn files only)
Save the data in the root folder on the USB memory.
Furthermore, even for files saved in the root folder, only
files with the extension "prn" are displayed.
SC-F3000 Series User's Guide
Basic Printing
73
To Next Page
Loading...
Need help?
General