Epson SC-F3000 Series User Manual

H
Tuck in the T-shirt so that it does not drape over
the movable base.
Loading on a Platen without a
Grip Pad
When loading a T-shirt (media) on a platen without a
grip pad, use the frame supplied with the platen.
You can check the procedure in a video on YouTube.
Epson Video Manuals
A
Press the P button to turn on the printer.
B
Check that the platen is ejected forward.
If it is not ejected, press the } button to move the
platen forward.
C
On the printer's screen, confirm that the platen
position is as shown below.
When Platen Gap is set to Auto:
The optimum platen position varies depending
on the thickness of the media. Use the following
guideline to change the platen position.
Media thickness Platen position
0 mm to 4 mm P
4 mm to 7 mm 1
7 mm to 10 mm 2
10 mm to 13 mm 3
13 mm to 16 mm 4
16 mm to 19 mm 5
19 mm to 22 mm 6
22 mm to 25 mm 7
25 mm to 29.5 mm 8
When Platen Gap is set to Manual:
The optimum platen position varies depending
on the thickness of the media being loaded and
the type of platen being used. See the following
for more details.
U “Table for Platen Gap setting values for
media thicknesses” on page 142
See the following for how to change the platen
position.
U “How to change the platen position” on
page 58
D
Remove the frame from the platen.
SC-F3000 Series User's Guide
Basic Printing
62

Epson SC-F3000 Series Specifications

General

Brand	Epson
Model	SC-F3000 Series
Category	Printer
Language	English