Printer model Product name Part number
SC-F3070 Black T47X1
Cyan T47X2
Magenta T47X3
Yellow T47X4
White T47XA
Maintenance Liquid T47XB
SC-F3080 Black T48B1
Cyan T48B2
Magenta T48B3
Yellow T48B4
White T48BA
Maintenance Liquid T48BB
Epson recommends the use of genuine Epson Ink Supply Unit. Epson cannot guarantee the quality or reliability of
nongenuine ink. The use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and under
certain circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may not be displayed, and use of non-genuine ink is recorded for possible
use in service support.
Maintenance Parts
Except for SC-F3080
Product name Product number Explanation
Waste Ink Bottle C13S210071 Identical to the waste ink bottle supplied with the printer.
Head Cleaning Set C13S210105 Set of flushing pads and wiper unit.
Anti-Drying Cap C13S210109 Replacement anti-drying caps.
Air filter C13S210111 Replacement air filters.
Flushing Pad Set C13S210107 Purchase when changing only the flushing pads.
Maintenance Kit T7362 The same as the maintenance kit supplied with the printer.
Cleaning ink supply unit T44A9 Use for Keeping Preparation and to change the Printer
Mode.
Clean Room Wiper
*
C13S090016 The same as the clean-room wipers supplied with the
printer.
* Not available for purchase in some countries and regions. We recommend BEMCOT M-3II by Asahi Kasei Corporation when
purchasing commercial products.
SC-F3000 Series User's Guide
Appendix
134
To Next Page
Loading...
Need help?
General