Epson SC-F3000 Series User Manual

D Anti-Drying Caps
Caps that close the print head nozzles to prevent them from drying while not printing. There are two anti-drying
caps, one for white and one for colors. Anti-drying caps are consumables. Replace them if a message is displayed.
U “Replacing the Anti-Drying Caps” on page 96
E Wiper Unit
Used to wipe off the ink that is stuck to the print head nozzles. Wiper units are consumables. Replace them if a
message is displayed.
U “Replacing the Head Cleaning Set” on page 94
F Flushing Pad (2 places, front and back)
The ink is ejected to here during flushing. Flushing pads are consumables. Replace them if a message is displayed.
U “Replacing the Head Cleaning Set” on page 94
G Air Filter (3 places total, left and right)
The air from the printer passes through this filter during operation. Air filters are consumables. Replace them if a
message is displayed.
U “Replacing the Air Filters” on page 98
SC-F3000 Series User's Guide
Introduction
13

Epson SC-F3000 Series Specifications

General

Brand	Epson
Model	SC-F3000 Series
Category	Printer
Language	English