Epson SC-P7000 Series User Manual

Loading Cut Sheets Smaller than
A3 Size
c
Important:
❏ Insert the paper just before printing. The rollers
may leave impressions on paper that is left in
the printer.
❏ When roll paper is loaded, rewind the roll paper
before loading the cut sheets.
U “Removing Roll Paper” on page 32
Note:
❏ The paper that can be used in the printer is detailed
in the following section.
U “Supported Media” on page 159
❏ When paper has not been loaded in the printer, press
the Z button to check the loading methods.
Buttons that are used in the following settings
A
Turn on the printer by pressing the P button.
B
Press the l button, and then select Cut Sheet
from the Paper Source menu.
C
Close the roll paper cover.
D
Insert the paper into the printer, keeping its right
edge aligned with the loading mark on the roll
paper cover.
c
Important:
Load cut sheets vertically.
For paper smaller than A4 size, insert by keeping
the right edge aligned with the additional line
below the paper feed slot.
Press the d button. is displayed on the screen.
E
Press the d button.
The paper moves to the starting print position.
F
Check the media type.
U “Checking and Setting the Paper Type” on
page 37
Removing Cut Sheets
Buttons that are used in the following settings
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Basic Operations
36

Epson SC-P7000 Series Specifications

General

Brand	Epson
Model	SC-P7000 Series
Category	Printer
Language	English