Epson SC-P7000 Series User Manual

❏ Save only:
Saves the job without printing.
Next, print the document normally.
Making Settings for Mac OS X
A
When you have created the data, from the File
menu of the application, click Print and so on.
B
Check that the printer is selected, and then select
HDD Settings from the list.
C
Select Print Mode.
After clicking Print, the operations differ
depending on the selected content as shown
below.
❏ Print and Save:
Saves the job to the hard disk at the same time as
printing. When Print after Transmission
Completed is selected, printing starts after the
print job has been saved to the hard disk unit.
❏ Print only:
Prints the job without saving to the hard disk.
❏ Save only:
Saves the job without printing.
Next, print the document normally.
Viewing and Printing
Saved Print Jobs
This section describes how to view and print saved jobs
from the control panel.
Buttons that are used in the following settings
A
Confirm that the printer is ready and press the r
button.
The settings menu will be displayed.
B
Press the d button, and then the r button.
The Print Job menu will be displayed.
C
Press the d/u buttons to select Saved Job Queue
and press the Z button.
The names of stored print jobs are displayed.
D
Press the d/u buttons to select the desired job
and press the Z button.
Information on the selected job will be displayed.
SC-P9000 Series/SC-P7000 Series/SC-P8000 Series/SC-P6000 Series User's Guide
Using the Optional Hard Disk Unit
59

Epson SC-P7000 Series Specifications

General

Brand	Epson
Model	SC-P7000 Series
Category	Printer
Language	English